UK › Hair Dryers
How much does it cost to run a hair dryer?
About 11p per 10 minutes
2,400 W · 10 minutes · Great Britain average 26.32p/kWh, Direct Debit (October to December 2026)
Work out your cost ↓A 2,400 W hair dryer (Remington D5220) uses 0.4 kWh in 10 minutes on full heat. Using the Great Britain average Direct Debit cap rate for October to December 2026, the estimate is 11p per 10 minutes and £3.20 a month. This assumes 10 minutes a day.
- 11pper 10 minutes, GB average
- £3.20a month in this example
- 10p–11pper 10 minutes, East Midlands vs Merseyside and Northern Wales
Updated November 2026 · Ofgem price cap October to December 2026 · Examples are labelled with their source · How we calculate
Hair dryer running cost calculator
Enter your appliance's wattage (on the label or rating plate), how long it runs each time and how often. Enter your postcode or choose your region and how you pay to use your price cap rate, or type the unit rate from your bill.
Monthly cost by drying time a day
| 1,220 W | 1,600 W | 2,400 W | |
|---|---|---|---|
| 5 min a day | £0.81 | £1.07 | £1.60 |
| 10 min a day | £1.63 | £2.13 | £3.20 |
| 15 min a day | £2.44 | £3.20 | £4.80 |
| 20 min a day | £3.26 | £4.27 | £6.40 |
At the Great Britain average Direct Debit rate of 26.32p/kWh.
Cost to run a hair dryer in every region
The table uses the same example and shows each region's Direct Debit rate, starting with the lowest unit rate; Northern Ireland uses Power NI's regulated Monthly Direct Debit rate including VAT. Average rates by payment method: Direct Debit 26.32p · standard credit 27.80p · prepayment meter 25.52p.
| Region | Unit rate | Per 10 minutes | Per month |
|---|---|---|---|
| East Midlands | 25.36p | 10p | £3.09 |
| North Eastern England | 25.46p | 10p | £3.10 |
| Yorkshire | 25.60p | 10p | £3.11 |
| West Midlands | 25.60p | 10p | £3.11 |
| Southern Scotland | 26.11p | 10p | £3.18 |
| Northern Scotland | 26.35p | 11p | £3.21 |
| Southern England | 26.47p | 11p | £3.22 |
| North Western England | 26.49p | 11p | £3.22 |
| Southern Wales | 26.55p | 11p | £3.23 |
| South Western England | 26.58p | 11p | £3.23 |
| London | 26.60p | 11p | £3.24 |
| Eastern England | 26.61p | 11p | £3.24 |
| South Eastern England | 26.88p | 11p | £3.27 |
| Merseyside and Northern Wales | 27.86p | 11p | £3.39 |
| Great Britain average | 26.32p | 11p | £3.20 |
| Northern Ireland (Power NI) | 32.78p | 13p | £3.99 |
What drives the cost
Heat setting
Most of the power goes into the heater; cool settings draw much less.
Drying time
Longer or thicker hair takes longer.
How to cut the cost
- Towel-dry first.
- Use a lower heat setting where it works for your hair.
Safety
- Use the hair dryer outside the bathroom and away from water. Unplug it after use and let it cool on a heat-resistant surface (Electrical Safety First).
Safety guidance: Electrical Safety First: hair dryers.
Questions
How much does it cost to run a hair dryer in the UK?
A 2,400 W hair dryer (Remington D5220) uses 0.4 kWh in 10 minutes on full heat. At the Great Britain average price cap rate of 26.32p per kWh by Direct Debit (October to December 2026), that is about 11p per 10 minutes and £3.20 a month at 10 minutes a day. Regional estimates per 10 minutes range from 10p (East Midlands) to 11p (Merseyside and Northern Wales).
Does a more powerful hair dryer cost more?
Per minute yes, but it may dry your hair faster, so the total can be similar.
Where these numbers come from
Cost = energy used (kWh) × your unit rate. Unit rates are the Ofgem energy price cap for October to December 2026 by region and payment method; we check for new figures every week. Rated wattages on full heat.
Example figures from: Remington D5220 (2,400 W) · Dyson Supersonic Nural (1,600 W) · Dyson Supersonic Travel (up to 1,220 W).
Estimates use Ofgem's single-rate electricity price cap figures for Great Britain for October to December 2026 (Ofgem, Open Government Licence). The daily standing charge is payable separately. If you have a fixed tariff, enter the unit rate from your bill. If your rate varies by time of day, use the rate for when you run the appliance.