UK › Immersion Heaters
How much does it cost to run an immersion heater?
About 79p per hour of heating
3 kW · 1 hour · Great Britain average 26.32p/kWh, Direct Debit (October to December 2026)
Work out your cost ↓A 3 kW element uses 3 kWh in one hour at its rated power. This example uses the 240 V rating. Using the Great Britain average Direct Debit cap rate for October to December 2026, the estimate is 79p per hour of heating and £24.02 a month. This assumes 1 hour of heating a day.
- 79pper hour of heating, GB average
- £24.02a month in this example
- 76p–84pper hour of heating, East Midlands vs Merseyside and Northern Wales
Updated November 2026 · Ofgem price cap October to December 2026 · Examples are labelled with their source · How we calculate
Immersion heater running cost calculator
Enter the element's power and the time it actually spends heating each day. Enter your postcode or choose your region and how you pay to use your price cap rate, or type the unit rate from your bill.
Monthly cost by heating time a day
| 1,000 W | 2,000 W | 3,000 W | |
|---|---|---|---|
| 30 min a day | £4.00 | £8.01 | £12.01 |
| 1 hour a day | £8.01 | £16.01 | £24.02 |
| 2 hours a day | £16.01 | £32.02 | £48.03 |
| 3 hours a day | £24.02 | £48.03 | £72.05 |
At the Great Britain average Direct Debit rate of 26.32p/kWh.
Cost to run an immersion heater in every region
The table uses the same example and shows each region's Direct Debit rate, starting with the lowest unit rate; Northern Ireland uses Power NI's regulated Monthly Direct Debit rate including VAT. Average rates by payment method: Direct Debit 26.32p · standard credit 27.80p · prepayment meter 25.52p.
| Region | Unit rate | Per hour of heating | Per month |
|---|---|---|---|
| East Midlands | 25.36p | 76p | £23.14 |
| North Eastern England | 25.46p | 76p | £23.23 |
| Yorkshire | 25.60p | 77p | £23.36 |
| West Midlands | 25.60p | 77p | £23.36 |
| Southern Scotland | 26.11p | 78p | £23.83 |
| Northern Scotland | 26.35p | 79p | £24.04 |
| Southern England | 26.47p | 79p | £24.15 |
| North Western England | 26.49p | 79p | £24.17 |
| Southern Wales | 26.55p | 80p | £24.23 |
| South Western England | 26.58p | 80p | £24.25 |
| London | 26.60p | 80p | £24.27 |
| Eastern England | 26.61p | 80p | £24.28 |
| South Eastern England | 26.88p | 81p | £24.53 |
| Merseyside and Northern Wales | 27.86p | 84p | £25.42 |
| Great Britain average | 26.32p | 79p | £24.02 |
| Northern Ireland (Power NI) | 32.78p | 98p | £29.91 |
What drives the cost
Element-on time
The element only draws power while the water is heating; the thermostat switches it off when the tank is hot.
Hot water used
More baths and showers mean more reheating.
Tank insulation
A well-insulated tank loses less heat, so it needs less reheating.
How to cut the cost
- Use a timer so it heats only when you need hot water.
- Fit an insulating jacket to an older tank.
- For a conventional hot-water cylinder, keep the cylinder thermostat at 60°C to help control Legionella, following the system manufacturer's instructions.
Safety
- If you suspect the thermostat is faulty or lacks an independent safety cut-out, ask a registered electrician to check it. If the immersion heater is your main hot-water source, Electrical Safety First recommends a timer.
Safety guidance: Electrical Safety First: immersion heater advice.
Questions
How much does it cost to run an immersion heater in the UK?
A 3 kW element uses 3 kWh in one hour at its rated power. This example uses the 240 V rating. At the Great Britain average price cap rate of 26.32p per kWh by Direct Debit (October to December 2026), that is about 79p per hour of heating and £24.02 a month at 1 hour of heating a day. Regional estimates per hour of heating range from 76p (East Midlands) to 84p (Merseyside and Northern Wales).
Should I leave the immersion heater on all the time?
No: with the thermostat it won't heat constantly, but it keeps reheating the tank as it loses heat. A timer that heats the water before you need it usually uses less.
Where these numbers come from
Cost = energy used (kWh) × your unit rate. Unit rates are the Ofgem energy price cap for October to December 2026 by region and payment method; we check for new figures every week. Element ratings at 240 V; the draw is slightly lower at 230 V.
Example figures from: Backer Heatrod CESTB 340 (3 kW) · Backer Heatrod HE2 (2 kW) · Backer Heatrod HE1 (1 kW).
Estimates use Ofgem's single-rate electricity price cap figures for Great Britain for October to December 2026 (Ofgem, Open Government Licence). The daily standing charge is payable separately. If you have a fixed tariff, enter the unit rate from your bill. If your rate varies by time of day, use the rate for when you run the appliance.