UK › Comparisons › Induction vs gas hob

Induction vs gas hob: which costs less to cook on?

Using ENERGY STAR's indicative US transfer efficiencies and the current Great Britain average Direct Debit rates, gas costs less than induction per kWh of heat transferred to the food or water in the pan. The result depends on the hob, cookware and tariff.

Cost at your rates

Enter a postcode or choose a region and payment method to load reference rates. For your own costs, enter the unit rates from your bill. If the gas rate is blank, enter it from your bill.

Electricity 26.32p · gas 7.97p per kWh (Great Britain average, Direct Debit)
1 kWh of heat transferred to the pan contents (benchmark)
Gas hob24p
Induction hob31p

Where the numbers come from

ENERGY STAR's 2025 electric cooking factsheet says about 85% of an induction hob's heat goes into what is in the pan, against about a third for gas. So 1 kWh of heat in the pan needs about 1.18 kWh of electricity on induction, or 3 kWh of gas.

These are US benchmark efficiencies applied to Great Britain prices; a comparable UK meal test was not found. Pan size, lids and how you cook change the result.

Ways to cut the cost

Related calculators: Induction Hobs · Electric Ovens

Questions

Is induction cheaper than gas?

At current GB price cap rates, gas is cheaper for the same heat into the pan in our example, because gas costs much less per kWh even though less of its heat reaches the pan. The gap would close if electricity prices fell relative to gas.

Why consider induction if it isn't cheaper?

An induction hob uses no gas at the hob, can heat cookware quickly and has a flat surface that is easy to wipe clean. Running costs depend on your tariffs and how you cook.

Sources: ENERGY STAR electric cooking products factsheet (2025) · Ofgem price cap rates. Costs exclude standing charges.

Estimates use Ofgem's single-rate electricity price cap figures for Great Britain for October to December 2026 (Ofgem, Open Government Licence). Estimates exclude any standing charges on your tariff. If you have a fixed tariff, enter the unit rate from your bill. If your rate varies by time of day, use the rate for when you run the appliance.